How to take a group photo

8 min read · Updated
How to take a group photo
Image: Benjamin Couprie, Public domain · Wikimedia Commons

Group photos look simple but go wrong in familiar ways: someone is hidden, the back row is soft, a person blinks or harsh sun makes everyone squint. A little planning fixes most of this. This guide covers arranging people, choosing an aperture that keeps every row sharp, finding even light, picking the camera height and using burst or the self-timer so you get one frame where everyone looks good.

Quick settings for group photos

SettingStarting value (approximate)Section
Aperture, one rowf/4–f/5.62
Aperture, several rowsf/8–f/112
Focus pointFaces about one-third into the group2
Shutter speed, handheld1/250 s or faster4
Drive modeBurst, or self-timer with several shots4
Lens, full frameAbout 35–70 mm1
Camera heightSlightly above eye level5

1Arrange the group

Every face should be clearly visible. Tight, staggered rows make a group look connected, while gaps and straight lines look stiff. Place taller people at the back or the sides, and fill gaps so you can see each face between the shoulders in front.

Use a lens around a normal focal length. A very wide lens close up makes people at the edges look stretched, so step back and use a slightly longer focal length when you can.

How to do it
  • Stand tallest people in the back and centre or at the ends; seat or kneel the front row.
  • Stagger people so each face sits in a gap between two heads in front.
  • Ask everyone to step close, shoulders slightly angled towards the centre.
  • Keep people at the frame edges away from the corners of a wide lens.

2Keep every row sharp

Depth of field must cover the distance between the front and back rows. One row needs little; several rows need more. Closing the aperture and stepping back both increase depth of field.

Focus about one-third of the way into the group, since depth of field extends further behind the focus point than in front of it at normal distances (approximate).

How to do it
  • For one row, try about f/4–f/5.6; for several rows, about f/8–f/11 (approximate).
  • Focus on a face in the middle or second row, not the front.
  • Keep rows close together so the depth to cover stays small.
  • Zoom in on a test shot to check the front and back faces.

3Find soft, even light

Direct midday sun causes squinting and hard shadows under eyes and noses. Even light from open shade, an overcast sky or a large window flatters everyone and keeps faces equally bright.

If people must face bright sun, turn them so the sun is behind or to one side and use fill flash or a reflector to brighten faces.

Find soft, even light
Image: Unknown author, Public domain · Wikimedia Commons
How to do it
  • Move the group into open shade, with the bright sky in front of them, not behind you.
  • Check that no one stands half in sun and half in shade.
  • With backlight, add fill flash at low power to lift faces.
  • Indoors, bounce flash off a white ceiling or wall for even coverage.

4Beat blinks and expressions

The more people, the more likely someone blinks in any single frame. Taking several frames quickly greatly improves your chances of a clean one.

Use burst mode when shooting yourself; use the self-timer with multiple shots when you are in the photo. Talk to the group, count down, and keep shooting after the 'official' frame, as relaxed smiles often come just after.

How to do it
  • Shoot a short burst of three to five frames for every pose.
  • Set the self-timer to about 10 seconds with several shots when you join the group.
  • Use a shutter speed of about 1/250 s or faster handheld to freeze small movements (approximate).
  • Tell people when the last frame is coming, then take one more.

5Choose camera height and position

A camera slightly above eye level makes people lift their chins, which looks flattering and lets you see faces in the back rows. From a low position, the front row hides those behind.

For large groups, raise the camera further: stand on a step or chair, use a balcony or a tall tripod, and ask people to look up.

How to do it
  • Hold the camera a little above eye level for small groups.
  • For large groups, shoot from a stable raised position looking down.
  • Keep the camera level so people at the edges do not appear to lean.
  • Leave some space around the group to crop to the final ratio later.

6Use a tripod and direct clearly

A tripod frees your hands to direct people and keeps the framing identical between frames, which also lets you combine the best faces from several shots later.

Be friendly and decisive. People relax when someone clearly runs the shot and it is over quickly.

How to do it
  • Set up framing and focus before calling the group in.
  • Give short, clear instructions, one at a time.
  • Check that glasses do not reflect light; ask people to tilt their heads slightly down if they do.
  • Review a frame zoomed in before letting the group go.

Before you press the shutter

  • Every face visible
  • Tall people at the back or sides
  • Aperture suits the number of rows
  • Focus about one-third into the group
  • Even light on all faces
  • Camera slightly above eye level
  • Burst or multi-shot self-timer set
  • Test frame checked zoomed in

Frequently asked questions

What aperture should I use for a group photo?

For one row, about f/4–f/5.6 is usually enough; for several rows, about f/8–f/11 (approximate). Check a test frame zoomed in.

Where should I focus in a group photo?

About one-third of the way into the group, typically on a face in the middle or second row.

How do I avoid people blinking?

Take several frames quickly with burst mode or a multi-shot self-timer, and count down so people know when to look at the camera.

How do I get in the group photo myself?

Use a tripod and the self-timer, or a phone app or remote. Leave a space for yourself before you press the shutter.

Sources

Related guides