How to check a used lens before buying

8 min read · Updated
How to check a used lens before buying
Image: Alexkom000, CC BY 4.0 · Wikimedia Commons

Lenses keep their value and can last decades, so buying used is a sensible way to grow your kit. A few minutes of careful checking separates a bargain from an expensive repair. This guide walks you through inspecting the glass with a flashlight, checking the aperture, rings and mount, testing autofocus and taking a set of test shots, plus what to ask about returns.

What to check and what it means

CheckWhat you want to seeSection
Glass with flashlightClear, no web-like threads or milky cloud1
Scratches and dustLight dust fine; deep front scratches note2
Aperture bladesDry, snappy, no oil3
Focus and zoom ringsSmooth, even, no grinding or play4
AutofocusFast, quiet, locks repeatably5
Test shotsEven sharpness across the frame6
Mount and contactsClean contacts, light wear only7
ReturnsA written return or test period8

1Look through the glass for haze and fungus

Remove both caps, set the aperture wide open and shine a small flashlight through the lens from the back and the front, looking at an angle. The beam reveals what normal light hides.

Fungus looks like fine, branching threads or spots, often near the edges. Haze looks like a milky, even fog that lowers contrast. Both can need a professional clean, and fungus can spread to other gear.

Look through the glass for haze and fungus
Image: El Grafo, CC BY-SA 4.0 · Wikimedia Commons
How to do it
  • Use a bright LED flashlight in a dim room.
  • Tilt the lens slowly so the beam crosses every element.
  • Walk away from lenses with fungus unless the price reflects a repair.
  • Treat haze as a reason to ask for a lower price or a clean.

2Judge scratches, cleaning marks and dust

Small dust particles inside a lens are normal and rarely visible in photos. Fine cleaning marks on the front element usually do little harm, though they can add flare against bright light.

Deep scratches on the rear element are more serious, because they sit close to the sensor and can show up, especially at small apertures.

How to do it
  • Check both front and rear elements in angled light.
  • Accept light internal dust; question larger specks or clumps.
  • Look for chips at the edges of the glass and dents in the filter thread, signs of a drop.

3Check the aperture blades

Aperture blades should be dry and close crisply. Oil on the blades makes them sticky, so exposures can become inconsistent, especially at small apertures.

On many lenses you can watch the blades with depth-of-field preview or by changing the aperture while looking into the front.

How to do it
  • Look for a shiny or wet sheen on the blades.
  • Stop down to the smallest aperture and fire several shots; exposures should match.
  • Check that the opening is round or evenly shaped, not lopsided.

4Turn the focus and zoom rings

Rings should turn smoothly and evenly from end to end. Grinding, gritty feeling or tight spots can mean sand inside or a past impact. Wobble in an extending barrel suggests worn parts.

How to do it
  • Turn each ring slowly through its full range and listen.
  • Point the lens up and down to check that a zoom does not slide on its own (some creep is normal on older designs).
  • Gently feel for play in extended barrel sections.

5Test autofocus and stabilisation

Mount the lens on your camera or a compatible one and focus on targets near and far. Focus should be quick, quiet and repeatable. If the lens has stabilisation, watch the viewfinder at a long focal length: the image should settle once it switches on.

How to do it
  • Focus back and forth between a close and a distant target ten times.
  • Listen for clicks, grinding or hunting.
  • Try manual focus override if the lens offers it.
  • Check that the switches on the barrel all work.

6Take test shots wide open and stopped down

Photograph a detailed, flat subject such as a brick wall or printed page, square to the camera, on a tripod or with a fast shutter speed. Shoot at the widest aperture and around f/8.

View the images at 100% on a screen. Both sides should be similarly sharp; one soft side or corner may point to a decentred element after a drop.

How to do it
  • Shoot at both ends and the middle of a zoom range.
  • Compare left, right, top and bottom corners.
  • Take a frame of a plain sky at a small aperture to reveal rear-element marks or dust.

7Inspect the mount and contacts

Light circular marks on the metal mount are normal. Heavy wear, loose screws or bent parts suggest hard use. The electrical contacts should be clean and unbent, and the camera should read the lens without errors.

How to do it
  • Check that the lens clicks firmly onto the mount without wobble.
  • Look for missing or loose screws on the mount.
  • Confirm the camera shows the correct aperture and focal length data.

8Ask about returns and warranty

Even after careful checks, some faults show up only with use. Buying from sellers that offer a return period or a short warranty reduces risk. Terms vary by seller and country, so read them before paying.

How to do it
  • Ask for a written description of the condition.
  • Prefer sellers with a return or test period.
  • Keep the receipt and test the lens fully within the return window.

Before you pay

  • No fungus in flashlight check
  • Haze and scratches judged
  • Aperture blades dry and snappy
  • Rings smooth without grinding
  • Autofocus quick and repeatable
  • Stabilisation working (if fitted)
  • Test shots sharp on both sides
  • Mount and contacts in good shape
  • Return terms in writing

Sources

Related guides