How to photograph a city at night

8 min read · Updated
How to photograph a city at night
Image: Andrey Filippov, CC BY 2.0 · Wikimedia Commons

Cities change character after sunset. Windows light up, streets glow and traffic draws lines of colour. Getting clean, sharp night shots is mostly about timing and stability rather than expensive gear. This guide covers when to go out, how to set up a tripod, which settings to start with, how to handle mixed artificial light, how to capture light trails and how to stay safe while you work.

Starting settings (approximate)

SettingStarting valueSection
Best timeBlue hour, about 20–40 min after sunset1
SupportTripod, 2 s timer or remote2
ISOBase ISO, about 100–2003
ApertureAbout f/8–f/11 for depth and starbursts3
ShutterOften 1–30 s, set by the meter3
White balanceAbout 3,200–4,000 K, or RAW and adjust4
Light trailsAbout 5–30 s, low ISO, f/8–f/165

1Go at blue hour

Shortly after sunset the sky turns deep blue while it still holds some light. Artificial lights are already on, so the sky, buildings and streets are close in brightness. That balance often lasts only about 20–40 minutes (approximate), depending on latitude and season.

Later, the sky turns black and the contrast between lights and shadows becomes very high. Shooting in the window after sunset, or before sunrise, usually gives richer colour and more detail.

Go at blue hour
Image: Brian Hurh, CC0 · Wikimedia Commons
How to do it
  • Check sunset time for your location and arrive about 30 minutes early to set up.
  • Choose your viewpoint in daylight so you can find it again in the dark.
  • Shoot a series as the sky darkens and pick the frame where sky and lights balance best.

2Use a tripod and avoid shake

Night exposures often last from one second to thirty seconds or more. Even a slight movement blurs the image, so a stable support is essential. A wall, railing or bean bag can work if you have no tripod.

How to do it
  • Set up the tripod on firm ground and extend the thick leg sections first.
  • Use a 2-second self-timer or a remote release so pressing the button does not shake the camera.
  • Turn off image stabilisation if the lens or camera recommends doing so on a tripod.
  • Keep the centre column down and shield the camera from wind.

3Choose ISO, aperture and shutter

With a tripod, you do not need a high ISO. Keeping ISO at the camera's base setting, often about 100–200, gives the cleanest files and the widest dynamic range.

An aperture of about f/8–f/11 (approximate) keeps most of the scene sharp. It also turns small, bright lights into star shapes, called starbursts, created by diffraction at the aperture blades. Narrower apertures give stronger stars but more diffraction softening. Let the shutter speed be whatever the exposure needs.

How to do it
  • Use manual mode or aperture priority with ISO fixed at its base value.
  • Set about f/8 and take a test shot; check the histogram and highlights.
  • Use exposure compensation or adjust shutter speed to protect bright signs and lamps.
  • For exposures beyond 30 s, use bulb mode with a remote.

4Handle mixed white balance

Cities mix many light sources: warm sodium and tungsten lamps, cool LEDs, green-tinted fluorescent tubes and coloured signs. No single white balance makes all of them neutral.

Auto white balance can shift from frame to frame. Shooting RAW lets you decide afterwards; a setting around 3,200–4,000 K (approximate) often keeps the blue hour sky blue while taming warm streetlights.

How to do it
  • Shoot RAW so you can adjust white balance later without loss.
  • Set a fixed kelvin value so a series of frames stays consistent.
  • Choose which light should look neutral, usually the main subject, and let the others keep their colour.
  • Use local adjustments in editing to correct strong colour casts in small areas.

5Capture light trails

Moving cars leave streaks of red tail lights and white headlights when the shutter stays open for several seconds. Bridges, overpasses and curved roads make good viewpoints.

Exposures of about 5–30 seconds (approximate) usually give continuous trails. A low ISO and a smaller aperture such as f/11–f/16 help lengthen the exposure, and a neutral density filter can help at blue hour when it is still fairly bright.

How to do it
  • Frame the road with the camera on a tripod and focus on a distant fixed point.
  • Start with about 10 s at f/11 and ISO 100, then adjust.
  • Wait for traffic, buses or trams to cross the frame before you release the shutter.
  • Combine several exposures in editing if you want more trails than one shot captures.

6Focus and sharpness in the dark

Autofocus can struggle in low light. Focus on a bright edge such as a lit window or a streetlamp, or use live view magnification to focus manually.

How to do it
  • Focus on a high-contrast light source at the right distance, then switch to manual focus so it does not change.
  • Magnify live view to check fine detail before shooting.
  • Review a frame at 100% to confirm sharpness.

7Stay safe

Night photography often means standing in quiet places with valuable gear. Plan ahead and keep your attention on your surroundings, not only on the screen.

How to do it
  • Go with a friend when possible and tell someone where you will be.
  • Keep your bag closed and close to you, and carry only the gear you need.
  • Do not set up on roads, tram tracks or in the path of traffic; wear something reflective near roads.
  • Respect private property and local rules about tripods, and carry a small torch for walking.

Before you go out

  • Sunset time and blue hour window checked
  • Viewpoint scouted in daylight
  • Tripod and remote or timer ready
  • Base ISO and about f/8 set
  • RAW enabled and white balance fixed
  • Batteries charged and a spare in a warm pocket
  • Torch, reflective layer and a friend for safety

Sources

Related guides