How to photograph autumn colours

7 min read · Updated
How to photograph autumn colours
Image: Aney, CC BY-SA 3.0 · Wikimedia Commons

Autumn turns ordinary trees into strong colour, but photos often look flatter than the scene felt. Light, timing and a few simple tools make the difference. This guide covers when to go, which light suits the colours, how a polariser and white balance help and how to compose so the colour leads.

Quick setup

SituationWhat to trySection
Overcast dayClose-ups and forest interiors2
Sunny dayBacklit leaves, golden hour2
Shiny leavesPolarising filter3
Colours look coldWhite balance about 5500–6500 K4
Busy forestTelephoto detail or a single tree5
EditingSmall saturation steps6

1Time it right

Leaves change at different times depending on species, altitude, latitude and weather. Peak colour can last only one to two weeks in a given place (approximate).

Cold nights and sunny days usually make colours brighter; a dry or very mild autumn can be more muted.

How to do it
  • Check local foliage reports or parks pages.
  • Visit higher areas earlier and valleys later.
  • Go after a calm spell; wind and heavy rain strip leaves quickly.

2Choose the light

Soft overcast light shows colour without harsh shadows and suits forests and close-ups. Low sun at the golden hour warms the scene, and sunlight shining through leaves makes them glow.

Midday sun raises contrast and bleaches colour; at those hours head for shaded forest interiors.

Choose the light
Image: flemming christiansen, CC BY-SA 2.0 · Wikimedia Commons
How to do it
  • On cloudy days, keep the bright sky out of the frame.
  • On sunny days, shoot backlit leaves with the sun behind them.
  • Use a lens hood against flare.

3Use a polariser

Leaves reflect the sky, which washes out their colour. A polarising filter cuts these reflections and deepens colour and skies.

The effect depends on the light direction, and the filter costs about one to two stops of light (approximate).

How to do it
  • Rotate the filter while watching the leaves.
  • Strongest effect is at about 90° to the sun (approximate).
  • Avoid uneven skies with wide lenses.

4Set white balance

Auto white balance can neutralise warm colours. A daylight or cloudy preset keeps the warmth.

How to do it
  • Try daylight or cloudy preset, about 5500–6500 K.
  • Shoot raw to fine-tune later.

5Compose for colour

Strong colour needs simple framing. Contrast a red tree against dark conifers, or fill the frame with a pattern.

How to do it
  • Look for a single coloured tree or a path.
  • Use a telephoto to isolate details.
  • Include water reflections for symmetry.

6Edit gently

Too much saturation makes leaves look artificial and loses detail in reds.

How to do it
  • Raise vibrance rather than saturation.
  • Adjust individual colours carefully.
  • Watch the histogram of the red channel.

Before you go

  • Foliage reports checked
  • Weather calm
  • Polariser and lens hood packed
  • White balance set
  • Simple compositions planned
  • Raw on

Sources

Related guides