How to photograph products at home

8 min read · Updated
How to photograph products at home
Image: Friedrich Haag, CC BY-SA 4.0 · Wikimedia Commons

You do not need a studio to make clean product photos for a shop, a listing or a portfolio. A table near a window, a sheet of paper and a few pieces of card can produce sharp, evenly lit images. This guide walks through the setup, light, camera settings, colour, tricky reflective items and simple editing.

Starting settings (approximate)

SettingValueSection
ISO100–4003
Aperturef/8–f/113
Shutter speedAs needed on tripod3
White balanceCustom from grey card4
BackgroundPaper sweep, white or neutral1
LightLarge window or diffused lamp2

1Build a tabletop setup

A curved sheet of paper, called a sweep, removes the line between table and wall so the product seems to float on an even background.

How to do it
  • Place a table near a large window.
  • Tape a large sheet of paper to the wall or a box and let it curve onto the table.
  • Clean the product and remove dust and fingerprints.

2Shape the light

Light from one large source to the side gives shape and soft shadows. A sheer curtain or tracing paper softens direct sun. White card bounces light into shadows; black card adds contrast.

How to do it
  • Place the window light to one side or slightly behind the product.
  • Diffuse direct sun with a curtain or diffuser.
  • Add a white card on the shadow side and move it until shadows look right.
  • If using lamps, use matching bulbs and diffuse them.

3Set the camera

A tripod lets you use a low ISO and a moderate aperture so the whole product is sharp, with any shutter speed the light needs.

Set the camera
Image: THOR, CC BY 2.0 · Wikimedia Commons
How to do it
  • Mount the camera on a tripod and use a 2-second timer.
  • Set ISO 100–400 and about f/8–f/11.
  • Focus about one-third into the product, or focus stack small items.
  • Use a focal length around 50–100 mm (full frame) to avoid distorting shapes.

4Get accurate colour

Buyers expect the colour in the photo to match the product. Mixed light from windows and lamps creates colour casts.

How to do it
  • Turn off room lights when using window light.
  • Photograph a grey card in the scene and set a custom white balance from it.
  • Shoot raw so you can fine-tune colour later.

5Handle shiny and transparent items

Glass, metal and gloss reflect everything around them. You control what they reflect rather than trying to remove reflections.

How to do it
  • Surround shiny items with white or black card to shape reflections.
  • Light glass from behind through a diffuser for clean edges.
  • Use a polarising filter to reduce some reflections on non-metal surfaces.
  • Wear dark clothing so you do not appear in reflections.

6Choose angles and edit

Shops often need a front view, a three-quarter view, details and a scale shot. Keep the same setup for a consistent set.

How to do it
  • Shoot front, side, back, three-quarter and details.
  • Keep camera height and distance the same across a set.
  • In editing, adjust exposure, crop straight and clean dust spots; do not change the product's real colour or shape.

Before you shoot

  • Product cleaned
  • Sweep background in place
  • Window light diffused
  • Reflector placed
  • Room lights off
  • Tripod and timer set
  • Grey card shot for white balance
  • Full set of angles planned

Sources

Related guides