Vignetting explained
Vignetting is the darkening of an image towards its corners. It comes from the lens design (optical), from the angle at which light reaches the sensor (natural), or from something physically blocking the light, such as a hood or stacked filters (mechanical). Optical vignetting usually shrinks when you stop down.

In short
- Optical vignetting comes from the lens barrel cutting off part of the light at wide apertures; stopping down reduces it.
- Natural vignetting follows the angle of light and affects wide lenses most; stopping down helps little.
- Mechanical vignetting is a hard dark corner from hoods, filters or the wrong lens for the sensor.
- Software removes most of it, but a gentle vignette is often added on purpose to guide the eye.
What vignetting looks like
Vignetting is a gradual fall-off in brightness from the centre to the corners. It is easiest to see in even areas such as a clear sky, a plain wall or a studio background.
It is measured in stops. A fast lens wide open may lose around one to two stops in the corners, though this varies widely between lenses (approximate).
Optical vignetting
In a lens with several elements, light reaching the corners at an angle can be partly blocked by the edges of the elements and the barrel. Seen from the corner, the opening looks like a cat's eye rather than a circle.
Stopping down makes the aperture smaller than the barrel opening, so all angles pass the same amount of light. Two or three stops down usually removes most optical vignetting (approximate). The cat's-eye shape is also why out-of-focus highlights near the corners look like lemons rather than circles.
Natural vignetting
Even an ideal lens darkens the corners, because light reaches them at an angle, travels further and meets the sensor obliquely. A simple model, the cos⁴ law, predicts fall-off that grows quickly with the angle.
This matters most with wide-angle lenses and is only partly helped by stopping down. Some sensors add a little more fall-off because pixels accept light less well at steep angles.
Mechanical vignetting
Mechanical vignetting is caused by something physically blocking the light: a hood made for a longer lens, a thick filter holder, several stacked filters or a lens designed for a smaller sensor.
It produces a sharp, dark corner rather than a soft gradient, and it changes little with aperture. Look at all four corners at the widest focal length to check for it.
Correcting vignetting
Many cameras correct vignetting in JPEGs. Raw editors use lens profiles to brighten the corners by the measured amount. Brightening corners raises noise there, which matters in low light.
Mechanical vignetting cannot be fully corrected; crop it away or remove the cause. For panoramas and scans, correct vignetting before stitching or combining, or the joins will show darker bands.
When to keep it
Our eyes are drawn to bright areas, so slightly darker corners pull attention towards the centre. Many portraits, food photos and moody street scenes use a gentle vignette for that reason.
Keep it subtle and natural. Heavy, obvious vignettes can look dated, and a vignette that does not match the light direction can feel fake.
Frequently asked questions
Does stopping down remove vignetting?
It removes most optical vignetting and a little natural vignetting. It does nothing for mechanical vignetting.
Why does my wide-angle lens vignette with a filter?
The filter ring may reach into the field of view. Slim filters, a larger filter size with a step-up ring or a filter holder sized for the lens can help.
Should I correct vignetting in every photo?
Not necessarily. Correct it for skies, panoramas and product shots; leave or add a little for portraits and mood.
Can vignetting appear on a full-frame lens on a smaller sensor?
Rarely. A smaller sensor uses only the centre of the image circle, where vignetting is weakest.