Autofocus modes and AF areas explained
Autofocus has two choices: the mode decides when the camera focuses (single locks once, continuous keeps adjusting), and the area decides where it looks (one point, a zone or automatic tracking). Use single AF for still subjects, continuous AF with tracking or eye detection for moving ones.

In short
- The AF mode controls timing; the AF area controls where the camera looks.
- Single AF locks focus once, which suits landscapes, products and posed portraits.
- Continuous AF keeps refocusing while you half-press, which suits sport, children and wildlife.
- Back-button focus separates focusing from the shutter so you can lock or track at will.
Mode and area: two separate decisions
Autofocus settings answer two questions. The focus mode decides when and how often the camera adjusts focus. The focus area decides which part of the frame it pays attention to.
Mixing them up is the most common cause of missed focus. A perfect area setting cannot rescue a moving subject if the camera locked focus once and stopped, and continuous AF cannot help if it is watching the wrong part of the frame.
Single AF
In single AF the camera focuses when you half-press the shutter button, confirms with a beep or a green mark, and then holds that distance until you let go. Many cameras will not fire until focus is confirmed.
It is ideal for subjects that stay still: landscapes, buildings, products and posed people. It also lets you focus and recompose, although with wide apertures and close subjects even a small turn can shift the plane of focus enough to soften the eyes.
Continuous AF and tracking
In continuous AF the camera keeps adjusting focus as long as you hold the button, predicting where a moving subject will be when the shutter opens. The camera usually fires even if focus is not perfect, so it favours timing.
Tracking modes add an area that follows the subject across the frame. You place a point on the subject and the camera moves it as the subject moves. This works best on subjects that contrast with their background.
Many cameras let you tune how quickly tracking jumps to a new subject. A slower setting helps when something passes in front of your subject briefly.
Eye, face and subject detection
Modern cameras can recognise faces, eyes and often animals, birds or vehicles. When detection is on, the camera picks the nearest eye automatically, which is very useful for portraits at wide apertures where depth of field is thin.
Detection is a helper, not a guarantee. Glasses, hats, profiles, low light and busy backgrounds can confuse it. If it locks on the wrong person or the wrong eye, switch to a smaller manual area and choose the point yourself.
AF areas: point, zone and wide
A single point gives precise control and suits still subjects and cluttered scenes. A zone groups several points and suits subjects that move somewhat predictably, such as a cyclist. Wide or automatic areas let the camera decide, which is fast but may grab the nearest or brightest object.
As a rule of thumb, use the smallest area that you can keep on the subject. The more freedom you give the camera, the more often it chooses something you did not intend.
Back-button focus
Back-button focus moves autofocus from the shutter button to a button on the back of the camera. The shutter button then only meters and fires.
With continuous AF set, holding the back button tracks the subject, and releasing it locks focus. This gives you single and continuous behaviour in one mode without changing settings. It takes a few days of practice but many sport, wildlife and wedding photographers rely on it.
When autofocus struggles
Autofocus needs contrast and light. Plain walls, fog, night skies, glass and repeating patterns can make it hunt. Aim at an edge with contrast, use the focus assist light, or switch to manual focus with magnification.
For the night sky, manual focus on a bright star with live view magnified is usually more reliable than any AF mode.
Frequently asked questions
Should I leave my camera in continuous AF all the time?
Many photographers do, especially with back-button focus, because it handles both still and moving subjects. For still subjects, single AF gives a clear confirmation and avoids small focus shifts.
Why does my camera focus on the background?
Usually the AF area is too wide and the camera picks the most contrasty or nearest detail. Choose a single point or a zone and place it on the subject.
Does eye AF work with animals?
Many recent cameras detect animal and bird eyes, but results vary with fur, feathers and light. Check your manual for which subjects are supported.
Is back-button focus worth learning?
If you shoot moving subjects or often focus and recompose, yes. If you mainly shoot landscapes on a tripod, the benefit is smaller.