Home › Optics & camera tech

Dynamic range explained

8 min read · Updated

Dynamic range is the span between the darkest and brightest tones that can still show detail, measured in stops. When a scene's contrast is larger than your sensor can record, you lose detail in highlights, shadows or both. Protect highlights first, then lift shadows, or blend several exposures.

Dynamic range explained
Image: Axel Jacobs, CC BY-SA 2.0 · Wikimedia Commons

In short

  • Dynamic range is measured in stops; each stop doubles the light.
  • A bright sunny scene can exceed what a single exposure can record.
  • Clipped highlights cannot be recovered, so protect them first.
  • Exposing to the right improves shadow quality, but only up to the point of clipping.

Stops and contrast

Photographers measure light in stops. One stop more means twice the light; one stop less means half. Dynamic range is the number of stops between the darkest tone with usable detail and the brightest tone before it turns pure white.

A scene has its own range too. An overcast day may span only a handful of stops, while a sunny scene with deep shade, or a window in a dark room, can span many more than a sensor can hold.

Sensor range versus scene range

Each camera records a certain range at its lowest ISO, and that range usually shrinks as ISO rises because noise eats into the shadows. Published figures differ depending on how they are measured, so treat any single number as approximate.

When scene contrast fits inside the sensor's range, one exposure captures everything. When it does not, you must choose what to sacrifice, or capture several exposures.

Clipping and the histogram

When a tone is brighter than the sensor can record, it clips to pure white with no detail. Shadows can clip to black in the same way, although in raw files they often still hold some noisy detail.

The histogram and the highlight warning (blinking areas in playback) are your guides. A small clipped area such as a street light or the sun is normal; a clipped sky or white dress usually is not.

Protect the highlights

With digital sensors, detail lost in the highlights is gone for good, whereas shadows can usually be lifted with some noise. So the common advice is to expose so that the important highlights just stay inside the histogram.

Use negative exposure compensation in bright scenes, or spot meter the brightest area that must keep detail. Shooting raw rather than JPEG keeps more headroom for editing.

Exposing to the right

Exposing to the right (ETTR) means making the exposure as bright as possible without clipping important highlights, then darkening it in editing. More light reaching the sensor means cleaner shadows and less noise.

It works best in raw and at base ISO with still subjects. It is less useful when the camera's preview is based on a JPEG that clips earlier than the raw file, so leave a small margin (approximate).

When one exposure is not enough

Graduated filters darken a bright sky in camera. Bracketing captures several exposures, for example −2, 0 and +2 stops, which you can blend into one image with high dynamic range (HDR) software or by hand.

Blending works best with a tripod and still subjects. Moving leaves, water or people can create ghosts, so use as few frames as needed and check the edges carefully.

Frequently asked questions

How many stops of dynamic range does a camera have?

It depends on the sensor, the ISO and how it is measured. Modern cameras at base ISO are often quoted at roughly 11–14 stops (approximate), and less at high ISO.

Is HDR the same as dynamic range?

Dynamic range is the measurement; HDR is a set of techniques for capturing or displaying a wider range than usual, often by combining exposures.

Should I always expose to the right?

Not always. It helps in raw at low ISO with still subjects. For action, JPEG or when highlights already fill the histogram, a normal exposure is safer.

Can editing recover blown highlights?

Only partly. Raw files keep a little headroom, but areas that are fully clipped in all colour channels have no detail left to recover.

Sources

Keep reading