Home › Optics & camera tech

Exposure compensation explained: when to use + and −

6 min read · Updated

Exposure compensation shifts the exposure away from what the camera's meter suggests, in steps of EV. The meter aims for an average, medium-toned result, so very bright scenes such as snow come out grey and very dark scenes come out too light. Dial + for bright scenes, − for dark ones, and check the histogram.

Exposure compensation explained: when to use + and −
Image: Beko, CC BY-SA 4.0 · Wikimedia Commons

In short

  • The meter assumes an average scene; it does not know whether your subject is white snow or a black coat.
  • Plus (+) brightens the result, minus (−) darkens it; one full EV doubles or halves the light.
  • Most cameras adjust in 1/3 EV steps, often over a range of −5 to +5 EV.
  • In P, A and S modes the camera changes shutter speed or aperture for you; in M it only moves the meter indicator unless Auto ISO is on.

What the meter is actually doing

A camera's built-in meter reads the light reflected from the scene and proposes a shutter speed, aperture and ISO that would make the scene look medium toned. In photography this reference tone is often described as a grey of about 18% reflectance, though the exact value a meter is calibrated to varies and is debated.

This works for most everyday scenes, which average out to something close to a medium tone. It fails when the scene itself is much lighter or darker than average. The meter has no way of knowing that a snowfield is supposed to be white, so it exposes it to look grey. A dark wall or a black coat is pushed towards grey too, which makes it look lighter than it was.

What exposure compensation changes

Exposure compensation tells the camera to deliver more or less exposure than its meter suggests. It is measured in EV: +1 EV doubles the light reaching the sensor, −1 EV halves it, and the same relationship holds for every further step.

Most cameras set compensation in 1/3 EV steps, and a range of −5 to +5 EV is common on current models (approximate; older or simpler cameras often stop at ±2 or ±3). On the display you usually see a scale with 0 in the middle and a marker that moves towards + or −.

Compensation does not rescue a scene that is beyond the sensor's dynamic range. It simply moves the whole exposure up or down so that the tones you care about land where you want them.

Which way to turn it

Bright scenes need plus. Snow, white sand, fog, a white wall or a subject against a bright window all push the meter towards underexposure, so the camera renders them darker than they looked. Around +1 to +2 EV is a usual starting point for snow (approximate); check the result and adjust.

Dark scenes need minus. A night street, a black cat, a dark stage or a sunset can be pushed too bright by the meter, so −1 EV or so brings back deep tones and saturated colour (approximate).

A simple way to remember it: compensate in the direction of the scene. If the scene is brighter than average, add light; if it is darker than average, take light away.

How it behaves in each exposure mode

In program (P) mode the camera adjusts its own combination of shutter speed and aperture. In aperture priority (A or Av) compensation changes the shutter speed, because you have fixed the aperture. In shutter priority (S or Tv) it changes the aperture.

In manual (M) mode you already control both settings, so compensation usually only shifts the point the meter scale calls zero. The exception is manual mode with Auto ISO, where many cameras apply the compensation by changing the ISO.

Compensation also combines with metering mode. Spot metering a face or a bright highlight gives a different starting point from evaluative metering of the whole frame, so the amount of compensation you need can change.

Checking the result

The histogram is the quickest check. For snow, the bulk of the graph should sit towards the right without a tall spike at the very edge; a spike there means clipped highlights that no editing will recover. For dark scenes, a graph bunched at the left is fine as long as the subject itself still has detail.

The playback image on the camera screen is affected by screen brightness and ambient light, so trust the histogram and the highlight warning over your impression of the picture.

Shooting RAW gives extra room to adjust exposure later, but it is still better to get the compensation close in the field: a badly underexposed RAW file shows more noise when brightened, and clipped highlights are gone in either format.

Common mistakes

Forgetting to reset it. Compensation set for a snow scene will overexpose the next indoor shot; many cameras keep the setting until you change it, so check the scale when you move to a new scene.

Compensating twice. If you have already changed to spot metering or locked exposure on a mid tone, further compensation may push the picture the wrong way.

Fighting the flash. Exposure compensation and flash exposure compensation are separate controls on most cameras: one changes the ambient exposure, the other changes how much the flash contributes.

Frequently asked questions

Why does snow look grey in my photos?

The meter exposes for an average medium tone, so a bright white scene is rendered darker than it really is. Add positive compensation, often around +1 to +2 EV (approximate), and check the histogram.

Does exposure compensation work in manual mode?

Usually it only moves the meter's zero point, because you set shutter speed and aperture yourself. With Auto ISO enabled, many cameras apply compensation by changing the ISO.

What does +1 EV mean?

One EV is one full stop: +1 EV lets in twice as much light, −1 EV lets in half as much. Most cameras step in thirds of an EV.

Is exposure compensation the same as flash exposure compensation?

No. Exposure compensation changes the overall ambient exposure; flash exposure compensation changes only how much light the flash adds.

Sources

Keep reading